/*!
    \file  main.c
    \brief use the TSI to perform continuous acquisitions of three channels 
*/

/*
    Copyright (C) 2017 GigaDevice

    2017-06-06, V1.0.0, firmware for GD32F3x0
*/

#include "gd32f3x0.h"
#include "gd32f3x0_eval.h"
#include <stdlib.h>
#include <stdio.h>

/* the current cycle number array of the channel pin */
uint16_t samplenum[4] = {0,0,0,0};

/* reference value sample array of TSI group5 */
uint16_t sample_refnum_array1[20] = {0};
uint16_t sample_refnum_array2[20] = {0};
uint16_t sample_refnum_array3[20] = {0};

/* average value of cycles */
uint16_t sample_refnum[3] = {0};

void delay(uint32_t nCount);
void gpio_config(void);
void tsi_config(void);
void led_config(void);
void tsi_transfer_pin(uint32_t TSI_groupx_pin);

/*!
    \brief      main function
    \param[in]  none
    \param[out] none
    \retval     none
*/
int main(void)
{
    int m=0;
    
    /* TSI peripheral and GPIOB Periph clock enable */
    rcu_periph_clock_enable(RCU_GPIOA);
    rcu_periph_clock_enable(RCU_GPIOB);
    rcu_periph_clock_enable(RCU_GPIOC);
    rcu_periph_clock_enable(RCU_GPIOD);
    rcu_periph_clock_enable(RCU_GPIOF);
    rcu_periph_clock_enable(RCU_TSI);

    /* PB11  TSI_CHCFG_G5P0     SAMPCAP
       PB12  TSI_CHCFG_G5P1     CHANNEL
       PB13  TSI_CHCFG_G5P2     CHANNEL
       PB14  TSI_CHCFG_G5P3     CHANNEL */

    /* configure the GPIO ports */
    gpio_config();

    /* configure the TSI peripheral */
    tsi_config();

    /* configure the LED */
    led_config();

    /* reference cycle value acquisition and processing */
    for(m=0;m<20;m++){
        /* get charge transfer complete cycle number of group5 pin1 */
        tsi_transfer_pin(TSI_CHCFG_G5P1);

        /* check the TSI flag:end of acquisition interrupt */
        if((uint8_t)SET == tsi_flag_get(TSI_FLAG_CTCF)){
            /* get charge transfer complete cycle number */
            sample_refnum_array1[m] = tsi_group5_cycle_get();
        }

        /* disable the selected pin as channel pin */
        tsi_channel_pin_disable(TSI_CHCFG_G5P1);

        /* get charge transfer complete cycle number of group5 pin2 */
        tsi_transfer_pin(TSI_CHCFG_G5P2);

        if((uint8_t)SET == tsi_flag_get(TSI_FLAG_CTCF)){
            sample_refnum_array2[m] = tsi_group5_cycle_get();
        }

        tsi_channel_pin_disable(TSI_CHCFG_G5P2);

        /* get charge transfer complete cycle number of group5 pin3 */
        tsi_transfer_pin(TSI_CHCFG_G5P3);

        if((uint8_t)SET == tsi_flag_get(TSI_FLAG_CTCF)){
            sample_refnum_array3[m] = tsi_group5_cycle_get();
        }
              
        tsi_channel_pin_disable(TSI_CHCFG_G5P3);

        /* delay for a period of time while all banks have been acquired */
        delay(0x1000);
    }

    for(m=1;m<20;m++){
        sample_refnum[0] += sample_refnum_array1[m];
        sample_refnum[1] += sample_refnum_array2[m];
        sample_refnum[2] += sample_refnum_array3[m];
    }

    /* average channel cycle value are obtained */
    sample_refnum[0] = sample_refnum[0]/19;
    sample_refnum[1] = sample_refnum[1]/19;
    sample_refnum[2] = sample_refnum[2]/19;

    while (1){
        /* acquisition pin1 of group5 */
        tsi_transfer_pin(TSI_CHCFG_G5P1);
     
        /* check the TSI flag--end of acquisition interrupt */
        if((uint8_t)SET == tsi_flag_get(TSI_FLAG_CTCF)){
            /* get charge transfer complete cycle number */
            samplenum[1] = tsi_group5_cycle_get();
        }

        /* channel 1 touch */
        if((sample_refnum[0]-samplenum[1]) > 0x20){
            /* pin1 of group5 is touched */
            gd_eval_led_on(LED1);
        }else{
            gd_eval_led_off(LED1);
        }
        tsi_channel_pin_disable(TSI_CHCFG_G5P1);

        /* acquisition pin2 of group5 */
        tsi_transfer_pin(TSI_CHCFG_G5P2);

        /* check the TSI flag--end of acquisition interrupt */
        if((uint8_t)SET == tsi_flag_get(TSI_FLAG_CTCF)){
            samplenum[2] = tsi_group5_cycle_get();
        }

        /* light LED2 */
        if((sample_refnum[1]-samplenum[2]) > 0x20){
            /* TSI_GROUP6_PIN3 is touched */
            gd_eval_led_on(LED2);
        }else{
            gd_eval_led_off(LED2);
        }
        tsi_channel_pin_disable(TSI_CHCFG_G5P2);

        /* acquisition pin3 of group5 */
        tsi_transfer_pin(TSI_CHCFG_G5P3);

        /* check the TSI flag--end of acquisition interrupt */
        if((uint8_t)SET == tsi_flag_get(TSI_FLAG_CTCF)){
            samplenum[3] =  tsi_group5_cycle_get();
        }
        /* light LED3 */
        if((sample_refnum[2]-samplenum[3]) > 0x20){
            /* pin3 of group5 is touched */
            gd_eval_led_on(LED3);
        }else{
            gd_eval_led_off(LED3);
        }
        tsi_channel_pin_disable(TSI_CHCFG_G5P3);
    }
}

/*!
    \brief      insert a delay time
    \param[in]  nCount: stall Count
    \param[out] none
    \retval     none
*/
void delay(uint32_t nCount)
{
    for(; nCount != 0; nCount--);
}

/*!
    \brief      configure the GPIO ports
    \param[in]  none
    \param[out] none
    \retval     none
*/
void gpio_config(void)
{
    /* GPIOB11 */
    /* alternate function output open-drain for sampling capacitor IO */
    gpio_mode_set(GPIOB,GPIO_MODE_AF,GPIO_PUPD_NONE,GPIO_PIN_11);
    gpio_output_options_set(GPIOB,GPIO_OTYPE_OD,GPIO_OSPEED_2MHZ,GPIO_PIN_11);

    /* GPIOB12  GPIOB13 GPIOB14 */
    /* alternate function output push-pull for channel and shield IOs */
    gpio_mode_set(GPIOB,GPIO_MODE_AF,GPIO_PUPD_NONE,GPIO_PIN_12);
    gpio_output_options_set(GPIOB,GPIO_OTYPE_PP,GPIO_OSPEED_2MHZ,GPIO_PIN_12);
    gpio_mode_set(GPIOB,GPIO_MODE_AF,GPIO_PUPD_NONE,GPIO_PIN_13);
    gpio_output_options_set(GPIOB,GPIO_OTYPE_PP,GPIO_OSPEED_2MHZ,GPIO_PIN_13);
    gpio_mode_set(GPIOB,GPIO_MODE_AF,GPIO_PUPD_NONE,GPIO_PIN_14);
    gpio_output_options_set(GPIOB,GPIO_OTYPE_PP,GPIO_OSPEED_2MHZ,GPIO_PIN_14);

    /* connect pin to peripheral */
    gpio_af_set(GPIOB,GPIO_AF_3,GPIO_PIN_11);
    gpio_af_set(GPIOB,GPIO_AF_3,GPIO_PIN_12);
    gpio_af_set(GPIOB,GPIO_AF_3,GPIO_PIN_13);
    gpio_af_set(GPIOB,GPIO_AF_3,GPIO_PIN_14);
}

/*!
    \brief      configure the TSI peripheral
    \param[in]  none
    \param[out] none
    \retval     none
*/
void tsi_config(void)
{
    /* TSI configure */
    tsi_init(TSI_CTCDIV_DIV32,TSI_CHARGE_2CTCLK,TSI_TRANSFER_2CTCLK,TSI_MAXNUM2047);
    tsi_sofeware_mode_config();
    tsi_sample_pin_enable(TSI_SAMPCFG_G5P0);
    tsi_group_enable(TSI_GCTL_GE5);

    /* disable hysteresis mode */
    tsi_hysteresis_off(TSI_PHM_G5P0|TSI_PHM_G5P1|TSI_PHM_G5P2|TSI_PHM_G5P3);

    /* enable TSI */
    tsi_enable();
}

/*!
    \brief      configure led
    \param[in]  none
    \param[out] none
    \retval     none
*/
void led_config(void)
{
    /* initialize the LEDs */
    gd_eval_led_init(LED1);
    gd_eval_led_init(LED2);
    gd_eval_led_init(LED3);

    /* close all of LEDs */
    gd_eval_led_off(LED1);
    gd_eval_led_off(LED2);
    gd_eval_led_off(LED3);
}

/*!
    \brief      acquisition pin y of group x,x=0..5,y=0..3 
    \param[in]  tsi_groupx_piny: TSI_CHCFG_GxPy,pin y of group x
    \param[out] none
    \retval     none
*/
void tsi_transfer_pin(uint32_t tsi_groupx_piny)
{
    /* configure the TSI pin channel mode */
    tsi_channel_pin_enable(tsi_groupx_piny);

    /* wait capacitors discharge */
    delay(0xD00);

    /* clear both MNERR and CTCF flags */
    tsi_flag_clear(TSI_FLAG_CTCF_CLR|TSI_FLAG_MNERR_CLR);

    /* start a new acquisition */
    tsi_software_start();

    /* wait the specified TSI flag state: MNERR or CTCF */
    while(RESET==tsi_flag_get(TSI_FLAG_CTCF|TSI_FLAG_MNERR));
}