Anson Zhao
caf1cb2360
init commmit.
|
6 年之前 | |
|---|---|---|
| .. | ||
| gd32f3x0_it.c | 6 年之前 | |
| gd32f3x0_it.h | 6 年之前 | |
| gd32f3x0_libopt.h | 6 年之前 | |
| main.c | 6 年之前 | |
| readme.txt | 6 年之前 | |
readme.txt
/*!
\file readme.txt
\brief description of the comparator output timer input capture demo
*/
/*
Copyright (C) 2017 GigaDevice
2017-06-06, V1.0.0, firmware for GD32F3x0
*/
This demo is based on the GD32350R-EVAL board, it shows how to configure the
comparator trigger timer 1 channel 3 input capture event, which is configured
to generate an interrupt on both rising and falling edge of the output signal.
In this demo, input 3.3V to CMP0_IP. After system start-up, enable comparator
and trigger interrupt,then LED3 is on.
Connect PA1 to +3V3.
\file readme.txt
\brief description of the comparator output timer input capture demo
*/
/*
Copyright (C) 2017 GigaDevice
2017-06-06, V1.0.0, firmware for GD32F3x0
*/
This demo is based on the GD32350R-EVAL board, it shows how to configure the
comparator trigger timer 1 channel 3 input capture event, which is configured
to generate an interrupt on both rising and falling edge of the output signal.
In this demo, input 3.3V to CMP0_IP. After system start-up, enable comparator
and trigger interrupt,then LED3 is on.
Connect PA1 to +3V3.