Anson Zhao
caf1cb2360
init commmit.
|
6 years ago | |
|---|---|---|
| .. | ||
| gd32f3x0_libopt.h | 6 years ago | |
| main.c | 6 years ago | |
| readme.txt | 6 years ago | |
readme.txt
/*!
\file readme.txt
\brief description of the master receiver one byte
*/
/*
Copyright (C) 2017 GigaDevice
2017-06-06, V1.0.0, firmware for GD32F3x0
*/
This demo is based on the GD32350R-EVAL board, it shows the I2C programming
mode in master receiving mode which the master only want to receive one byte of
data. In this demo,I2C1 is operated as master receiver,and the SCL line and SDA
line of I2C1 interface are controled by the I/O pin PB6 and PB7 respectively.
This demo shows the receiving one byte process of the master. And it will store
the received data in the i2c_receiver array.
This demo doesn't perform the data transfer actually, which is due to no
specific slave.In the specific application, we must send the correct slave
address, and the master and the slave may need to be connected by the jumper
if necessary.
\file readme.txt
\brief description of the master receiver one byte
*/
/*
Copyright (C) 2017 GigaDevice
2017-06-06, V1.0.0, firmware for GD32F3x0
*/
This demo is based on the GD32350R-EVAL board, it shows the I2C programming
mode in master receiving mode which the master only want to receive one byte of
data. In this demo,I2C1 is operated as master receiver,and the SCL line and SDA
line of I2C1 interface are controled by the I/O pin PB6 and PB7 respectively.
This demo shows the receiving one byte process of the master. And it will store
the received data in the i2c_receiver array.
This demo doesn't perform the data transfer actually, which is due to no
specific slave.In the specific application, we must send the correct slave
address, and the master and the slave may need to be connected by the jumper
if necessary.