Anson Zhao
caf1cb2360
init commmit.
|
6 жил өмнө | |
|---|---|---|
| .. | ||
| gd32f3x0_libopt.h | 6 жил өмнө | |
| main.c | 6 жил өмнө | |
| readme.txt | 6 жил өмнө | |
readme.txt
/*!
\file readme.txt
\brief description of the master transmitter and slave receiver
*/
/*
Copyright (C) 2017 GigaDevice
2017-06-06, V1.0.0, firmware for GD32F3x0
*/
This demo is based on the GD32350R-EVAL board, it shows the I2C programming mode in master
transmitter mode and slave receiving mode. In this demo,I2C0 is operated as master transmitter
,I2C1 is operated as slave receiver and the SCL line and SDA line of I2C interface are controled
by the I/O pin PB10 and PB11(or PB6 and PB7) respectively.
This demo shows the sending data process of the master and the receiving data process of the slave.
If transfer is sucessfully completed, LED1 and LED2 is light.
We shoud use the jumper to connect the PB6 and PB10. The PB7 and PB11 are connected as well.In
additon, the capacitance C8 of I/O pin PB11 needs to be removed.
\file readme.txt
\brief description of the master transmitter and slave receiver
*/
/*
Copyright (C) 2017 GigaDevice
2017-06-06, V1.0.0, firmware for GD32F3x0
*/
This demo is based on the GD32350R-EVAL board, it shows the I2C programming mode in master
transmitter mode and slave receiving mode. In this demo,I2C0 is operated as master transmitter
,I2C1 is operated as slave receiver and the SCL line and SDA line of I2C interface are controled
by the I/O pin PB10 and PB11(or PB6 and PB7) respectively.
This demo shows the sending data process of the master and the receiving data process of the slave.
If transfer is sucessfully completed, LED1 and LED2 is light.
We shoud use the jumper to connect the PB6 and PB10. The PB7 and PB11 are connected as well.In
additon, the capacitance C8 of I/O pin PB11 needs to be removed.