GD32F3x0_Firmware_Library/Examples/TIMER/TIMER0_dma_burst/readme.txt

/*!
    \file  readme.txt
    \brief description of the TIMER0 DMA burst demo
*/

/*
    Copyright (C) 2017 GigaDevice

    2017-06-06, V1.0.0, firmware for GD32F3x0
*/

  This demo is based on the GD32350R-EVAL board, it shows how touse DMA with TIMER0 
update request to transfer data from memory to TIMER0 capture compare register 0~3.
 
  TIMER0CLK is fixed to systemcoreclock, the TIMER0 prescaler is equal to 84(GD32F330)
or 108(GD32F350) so the TIMER0 counter clock used is 1MHz.

  The objective is to configure TIMER0 channel 0~3(PA8~PA11) to generate PWM signal.
capture compare register 0~3 are to be updated twice per circle.On the first update 
DMA request, data1 is transferred to CH0CV, data2 is transferred to CH1CV, data3 is 
transferred to CH2CV,data4 is transferred to CH3CV and duty cycle(10%,20%,30%,40%). 
On the second update DMA request, data5 is transferred to CH0CV, data6 is transferred 
to CH1CV, data7 is transferred to CH2CV,data8 is transferred to CH3CV and duty cycle
(50%,60%,70%,80%).