Anson Zhao
caf1cb2360
init commmit.
|
6 years ago | |
|---|---|---|
| .. | ||
| gd32f3x0_libopt.h | 6 years ago | |
| main.c | 6 years ago | |
| readme.txt | 6 years ago | |
readme.txt
/*!
\file readme.txt
\brief description of the TIMER1 external trigger demo
*/
/*
Copyright (C) 2017 GigaDevice
2017-06-06, V1.0.0, firmware for GD32F3x0
*/
This demo is based on the GD32350R-EVAL board, it shows how to
start TIMER peripherals with an external trigger.
TIMER1 is configured as slave timer for an external trigger connected to
TIMER1 CI0 pin :
- The TIMER1 CI0FE0 is used as trigger input
- Rising edge is used to start the TIMER1: event mode
- TIMER1 is used PWM1 Mode
The starts of the TIMER1 counter are controlled by the external trigger
Connect the TIMER1 CH0 pin to +3V3 on the board as a external trigger with a
rising edge.
\file readme.txt
\brief description of the TIMER1 external trigger demo
*/
/*
Copyright (C) 2017 GigaDevice
2017-06-06, V1.0.0, firmware for GD32F3x0
*/
This demo is based on the GD32350R-EVAL board, it shows how to
start TIMER peripherals with an external trigger.
TIMER1 is configured as slave timer for an external trigger connected to
TIMER1 CI0 pin :
- The TIMER1 CI0FE0 is used as trigger input
- Rising edge is used to start the TIMER1: event mode
- TIMER1 is used PWM1 Mode
The starts of the TIMER1 counter are controlled by the external trigger
Connect the TIMER1 CH0 pin to +3V3 on the board as a external trigger with a
rising edge.