Anson Zhao
caf1cb2360
init commmit.
|
6 years ago | |
|---|---|---|
| .. | ||
| gd32f3x0_libopt.h | 6 years ago | |
| main.c | 6 years ago | |
| readme.txt | 6 years ago | |
readme.txt
/*!
\file readme.txt
\brief description of the TIMER1 OC toggle demo
*/
/*
Copyright (C) 2017 GigaDevice
2017-06-06, V1.0.0, firmware for GD32F3x0
*/
This demo is based on the GD32350R-EVAL board, it shows how to
configure the TIMER peripheral to generate the toggle signal.
The TIMxCLK frequency is set to systemcoreclock , the prescaler is 42000(GD32F330)
or 54000(GD32F350) so the TIMER1 counter clock is 2KHz.
TIMER1 configuration: output compare toggle mode:
CH1 update rate = TIMER1 counter clock / CH1CC = 2000/4000 = 0.5 Hz.
\file readme.txt
\brief description of the TIMER1 OC toggle demo
*/
/*
Copyright (C) 2017 GigaDevice
2017-06-06, V1.0.0, firmware for GD32F3x0
*/
This demo is based on the GD32350R-EVAL board, it shows how to
configure the TIMER peripheral to generate the toggle signal.
The TIMxCLK frequency is set to systemcoreclock , the prescaler is 42000(GD32F330)
or 54000(GD32F350) so the TIMER1 counter clock is 2KHz.
TIMER1 configuration: output compare toggle mode:
CH1 update rate = TIMER1 counter clock / CH1CC = 2000/4000 = 0.5 Hz.