Anson Zhao
caf1cb2360
init commmit.
|
6 years ago | |
|---|---|---|
| .. | ||
| gd32f3x0_libopt.h | 6 years ago | |
| main.c | 6 years ago | |
| readme.txt | 6 years ago | |
readme.txt
/*!
\file readme.txt
\brief description of the auto baudrate detect
*/
/*
Copyright (C) 2017 GigaDevice
2017-06-06, V1.0.0, firmware for GD32F3x0
*/
This demo is based on the GD32350R-EVAL board, it shows how to use the USART
to detect and automatically set the USARTx_BAUD value based on the reception of
one character.
In this demo, firstly, the USART sends "\n\rUSART auto baudrate detection example\n\r"
to the hyperterminal, USART_ABDM_FTOF is set as the auto baud rate detection mode. If auto
baud rate detection is completed without error, LED1 is on.
You can send any character be in a start 10xxxxxx frame format(eg.0x0a or 0x01)
to implement the auto baud rate detection.
\file readme.txt
\brief description of the auto baudrate detect
*/
/*
Copyright (C) 2017 GigaDevice
2017-06-06, V1.0.0, firmware for GD32F3x0
*/
This demo is based on the GD32350R-EVAL board, it shows how to use the USART
to detect and automatically set the USARTx_BAUD value based on the reception of
one character.
In this demo, firstly, the USART sends "\n\rUSART auto baudrate detection example\n\r"
to the hyperterminal, USART_ABDM_FTOF is set as the auto baud rate detection mode. If auto
baud rate detection is completed without error, LED1 is on.
You can send any character be in a start 10xxxxxx frame format(eg.0x0a or 0x01)
to implement the auto baud rate detection.