anson
/
GD32F3x0_Firmware_Library


			
				
					
						
						
							123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173
							/*!
    \file  gd32f3x0_pmu.h
    \brief definitions for the PMU
*/

/*
    Copyright (C) 2017 GigaDevice

    2017-06-06, V1.0.0, firmware for GD32F3x0
*/

#ifndef GD32F3X0_PMU_H
#define GD32F3X0_PMU_H

#include "gd32f3x0.h"

/* PMU definitions */
#define PMU                           PMU_BASE                 /*!< PMU base address */

/* registers definitions */
#define PMU_CTL                       REG32((PMU) + 0x00U)     /*!< PMU control register */
#define PMU_CS                        REG32((PMU) + 0x04U)     /*!< PMU control and status register */

/* bits definitions */
/* PMU_CTL */
#define PMU_CTL_LDOLP                 BIT(0)                   /*!< LDO low power mode */
#define PMU_CTL_STBMOD                BIT(1)                   /*!< standby mode */
#define PMU_CTL_WURST                 BIT(2)                   /*!< wakeup flag reset */
#define PMU_CTL_STBRST                BIT(3)                   /*!< standby flag reset */
#define PMU_CTL_LVDEN                 BIT(4)                   /*!< low voltage detector enable */
#define PMU_CTL_LVDT                  BITS(5,7)                /*!< low voltage detector threshold */
#define PMU_CTL_BKPWEN                BIT(8)                   /*!< backup domain write enable */
#define PMU_CTL_LDLP                  BIT(10)                  /*!< low-driver mode when use low power LDO */
#define PMU_CTL_LDNP                  BIT(11)                  /*!< low-driver mode when use normal power LDO */
#define PMU_CTL_LDOVS                 BITS(14,15)              /*!< LDO output voltage select */
#define PMU_CTL_HDEN                  BIT(16)                  /*!< high-driver mode enable */
#define PMU_CTL_HDS                   BIT(17)                  /*!< high-driver mode switch */
#define PMU_CTL_LDEN                  BITS(18,19)              /*!< low-driver mode enable in deep-sleep mode */

/* PMU_CS */
#define PMU_CS_WUF                    BIT(0)                   /*!< wakeup flag */
#define PMU_CS_STBF                   BIT(1)                   /*!< standby flag */
#define PMU_CS_LVDF                   BIT(2)                   /*!< low voltage detector status flag */
#define PMU_CS_WUPEN0                 BIT(8)                   /*!< wakeup pin enable */
#define PMU_CS_WUPEN1                 BIT(9)                   /*!< wakeup pin enable */
#define PMU_CS_WUPEN4                 BIT(12)                  /*!< wakeup pin enable */
#define PMU_CS_WUPEN5                 BIT(13)                  /*!< wakeup pin enable */
#define PMU_CS_WUPEN6                 BIT(14)                  /*!< wakeup pin enable */
#define PMU_CS_LDOVSRF                BIT(15)                  /*!< LDO voltage select ready flag */
#define PMU_CS_HDRF                   BIT(16)                  /*!< high-driver ready flag */
#define PMU_CS_HDSRF                  BIT(17)                  /*!< high-driver switch ready flag */
#define PMU_CS_LDRF                   BITS(18,19)              /*!< low-driver mode ready flag */

/* constants definitions */
/* PMU low voltage detector threshold definitions */
#define CTL_LVDT(regval)              (BITS(5,7)&((uint32_t)(regval)<<5))
#define PMU_LVDT_0                    CTL_LVDT(0)              /*!< voltage threshold is 2.1V */
#define PMU_LVDT_1                    CTL_LVDT(1)              /*!< voltage threshold is 2.3V */
#define PMU_LVDT_2                    CTL_LVDT(2)              /*!< voltage threshold is 2.4V */
#define PMU_LVDT_3                    CTL_LVDT(3)              /*!< voltage threshold is 2.6V */
#define PMU_LVDT_4                    CTL_LVDT(4)              /*!< voltage threshold is 2.7V */
#define PMU_LVDT_5                    CTL_LVDT(5)              /*!< voltage threshold is 2.9V */
#define PMU_LVDT_6                    CTL_LVDT(6)              /*!< voltage threshold is 3.0V */
#define PMU_LVDT_7                    CTL_LVDT(7)              /*!< voltage threshold is 3.1V */

/* PMU LDO output voltage select definitions */
#define CTL_LDOVS(regval)             (BITS(14,15)&((uint32_t)(regval)<<14))
#define PMU_LDOVS_LOW                 CTL_LDOVS(1)             /*!< LDO output voltage low mode */
#define PMU_LDOVS_MID                 CTL_LDOVS(2)             /*!< LDO output voltage mid mode */
#define PMU_LDOVS_HIGH                CTL_LDOVS(3)             /*!< LDO output voltage high mode */

/* PMU low-driver mode enable in deep-sleep mode */
#define CTL_LDEN(regval)              (BITS(18,19)&((uint32_t)(regval)<<18))
#define PMU_LOWDRIVER_DISABLE         CTL_LDEN(0)              /*!< low-driver mode disable in deep-sleep mode */
#define PMU_LOWDRIVER_ENABLE          CTL_LDEN(3)              /*!< low-driver mode enable in deep-sleep mode */

/* PMU high-driver mode switch */
#define PMU_HIGHDR_SWITCH_NONE        ((uint32_t)0x00000000U)  /*!< no high-driver mode switch */
#define PMU_HIGHDR_SWITCH_EN          PMU_CTL_HDS              /*!< high-driver mode switch */

/* PMU low-driver mode when use normal power LDO */
#define PMU_NORMALDR_NORMALPWR        ((uint32_t)0x00000000U)  /*!< normal-driver when use normal power LDO */
#define PMU_LOWDR_NORMALPWR           PMU_CTL_LDNP             /*!< low-driver mode enabled when LDEN is 11 and use normal power LDO */

/* PMU low-driver mode when use low power LDO */
#define PMU_NORMALDR_LOWPWR           ((uint32_t)0x00000000U)  /*!< normal-driver when use low power LDO */
#define PMU_LOWDR_LOWPWR              PMU_CTL_LDLP             /*!< low-driver mode enabled when LDEN is 11 and use low power LDO */

/* PMU ldo definitions */
#define PMU_LDO_NORMAL                ((uint32_t)0x00000000U)  /*!< LDO operates normally when PMU enter deepsleep mode */
#define PMU_LDO_LOWPOWER              PMU_CTL_LDOLP            /*!< LDO work at low power status when PMU enter deepsleep mode */

/* PMU low power mode ready flag definitions */
#define CS_LDRF(regval)               (BITS(18,19)&((uint32_t)(regval)<<18))
#define PMU_LDRF_NORMAL               CS_LDRF(0)               /*!< normal-driver in deep-sleep mode */
#define PMU_LDRF_LOWDRIVER            CS_LDRF(3)               /*!< low-driver mode in deep-sleep mode */

/* PMU flag definitions */
#define PMU_FLAG_WAKEUP               PMU_CS_WUF               /*!< wakeup flag status */
#define PMU_FLAG_STANDBY              PMU_CS_STBF              /*!< standby flag status */
#define PMU_FLAG_LVD                  PMU_CS_LVDF              /*!< LVD flag status */
#define PMU_FLAG_LDOVSR               PMU_CS_LDOVSRF           /*!< LDO voltage select ready flag */
#define PMU_FLAG_HDR                  PMU_CS_HDRF              /*!< high-driver ready flag */
#define PMU_FLAG_HDSR                 PMU_CS_HDSRF             /*!< high-driver switch ready flag */
#define PMU_FLAG_LDR                  PMU_CS_LDRF              /*!< low-driver mode ready flag */

/* PMU WKUP pin definitions */
#define PMU_WAKEUP_PIN0               PMU_CS_WUPEN0            /*!< WKUP Pin 0 (PA0) enable */
#define PMU_WAKEUP_PIN1               PMU_CS_WUPEN1            /*!< WKUP Pin 1 (PC13) enable */
#define PMU_WAKEUP_PIN4               PMU_CS_WUPEN4            /*!< WKUP Pin 4 (PC5) enable */
#define PMU_WAKEUP_PIN5               PMU_CS_WUPEN5            /*!< WKUP Pin 5 (PB5) enable */
#define PMU_WAKEUP_PIN6               PMU_CS_WUPEN6            /*!< WKUP Pin 6 (PB15) enable */

/* PMU flag reset definitions */
#define PMU_FLAG_RESET_WAKEUP         PMU_CTL_WURST            /*!< wakeup flag reset */
#define PMU_FLAG_RESET_STANDBY        PMU_CTL_STBRST           /*!< standby flag reset */

/* PMU command constants definitions */
#define WFI_CMD                       ((uint8_t)0x00U)         /*!< use WFI command */
#define WFE_CMD                       ((uint8_t)0x01U)         /*!< use WFE command */

/* function declarations */
/* reset PMU registers */
void pmu_deinit(void);

/* select low voltage detector threshold */
void pmu_lvd_select(uint32_t lvdt_n);
/* select LDO output voltage */
void pmu_ldo_output_select(uint32_t ldo_output);
/* disable PMU lvd */
void pmu_lvd_disable(void);

/* functions of low-driver mode and high-driver mode in deep-sleep mode */
/* enable low-driver mode in deep-sleep mode */
void pmu_lowdriver_mode_enable(void);
/* disable low-driver mode in deep-sleep mode */
void pmu_lowdriver_mode_disable(void);
/* enable high-driver mode */
void pmu_highdriver_mode_enable(void);
/* disable high-driver mode */
void pmu_highdriver_mode_disable(void);
/* switch high-driver mode */
void pmu_highdriver_switch_select(uint32_t highdr_switch);
/* in deep-sleep mode, low-driver mode when use low power LDO */
void pmu_lowpower_driver_config(uint32_t mode);
/* in deep-sleep mode, low-driver mode when use normal power LDO */
void pmu_normalpower_driver_config(uint32_t mode);

/* set PMU mode */
/* PMU work in sleep mode */
void pmu_to_sleepmode(uint8_t sleepmodecmd);
/* PMU work in deepsleep mode */
void pmu_to_deepsleepmode(uint32_t ldo, uint8_t deepsleepmodecmd);
/* PMU work in standby mode */
void pmu_to_standbymode(uint8_t standbymodecmd);
/* enable PMU wakeup pin */
void pmu_wakeup_pin_enable(uint32_t wakeup_pin);
/* disable PMU wakeup pin */
void pmu_wakeup_pin_disable(uint32_t wakeup_pin);

/* backup related functions */
/* enable backup domain write */
void pmu_backup_write_enable(void);
/* disable backup domain write */
void pmu_backup_write_disable(void);

/* flag functions */
/* clear flag bit */
void pmu_flag_clear(uint32_t flag_clear);
/* get flag state */
FlagStatus pmu_flag_get(uint32_t flag);

#endif /* GD32F3X0_PMU_H */